metal curtain poles
-Please contact us by e-mail, telephone or by Fax for more details
of the products and services described in this web site.
All of our metal curtain poles are made to measure, and can be supplied in most arrangements from these pages. Please do not hesitate to contact us if you have any problems preparing your order. When you have made you selection of the style you wish then there are some simple steps you must follow to ensure that the size is correct. First of all select the finish you require then the diameter of your pole which can be either sixteen, twenty or twenty five millimetres. Once you have done that you must measure the length you require your pole to be, there is a diagram on the website to show you how to do this correctly. Select the type of brackets you require, for this you would normally need two vertical brackets for poles under two meter long and three brackets, one being horizontal for metal curtain poles over two meters long. When it comes to rings you need to do some simple maths and calculate the number required by dividing the pole length by thirty centimeters and then you multiply by four the result will give you the number of rings you need.
Please supply us with a template of your bay window, using a piece of wallpaper or lining paper. Please mark on the template where you would like the brackets to go, and where you want the finials to start, as shown on our website. It is best practice to cut out the template at the height at which the brackets will be attached. We will allow room for the brackets, unless you need to site the pole further away from the wall. In this case, please mark on the template the desired position of the inside of the pole.
For more information on metal curtain poles and how to order and fit them you can contact us directly by telephone or email. Our helpful and friendly staff are always on hand to assist you in any way they can.